JUTAI IP67 Blanking Safety Light Curtain CL20 - 8L8 Product Description
I. Introduction
The JUTAI safety light curtain CL20 - 8L8 functions by creating a light beam between the emitter and receiver, forming a protective shield. If an object or person enters the grid area, the light beam is interrupted, immediately triggering the safety system to take appropriate measures. Commonly installed at crucial points of devices like doors, automatic doors, lifting equipment, etc., it can promptly detect potential crushing hazards. Widely used in industrial and commercial environments, it is an essential part of automation systems, especially in situations requiring high safety standards.
II. Blanking Mode
The safety light curtain is installed within the door gap. When the door closes normally, the light beams of the light curtain are sequentially blocked from top to bottom. This sequential blocking is recognized by the system as a normal door closing action. If an object passes beneath and blocks the light beam when the door is in the process of closing, the door will open immediately.
III. Normal Mode
Installed on the inside and outside of the door. When the door is closed, the light beams do not pass through. In this mode, regardless of which light beam of the light curtain is blocked, the system will instantly output the door opening signal.
IV. Features
- Comprises an emitter and a receiver.
- Has an operating range of 1 - 8 meters.
- Maximum protection height is 1820mm in both concealing model and normal mode.
- Shell material is aluminum alloy.
V. Advantages
- Suitable for cold storage doors and humid environments with a temperature range of -25°C.
- Does not require a synchronous wire control box.
- Has a fast response speed of 0.03 seconds.
- Resistant to sunlight and electromagnetic interference.
- Supports customization (quantity).
